Sorry, this machine has already been sold. Please use the links below to find a similar machine, or list your own machine to sell.

GLEASON HYPOID 116 CNC GEAR GENERATOR

Sold

Make: Gleason Hypoid
Model: HYPOID 116
Condition: Used
Machine type: Other
Location of machine: United States
Ancillaries: Enclosed Guarding,
Hydraulic Clamping,
6 Axis DRO,
Coolant System,
Stock Divide
Magnetic Chip Separator

Machine Details

Automotive Version (Jobbing Version) Y Extreme Ratio4:1 (10:1)
Y Cone Distance: Max (30 Deg. Spiral Angle 
& 12in Diameter Cutter7.40in (9.00in 
Full Depth, Maximum 1.00in 
Face Width, Maximum 2.30in (2.750in ) Range of Tooth Numbers 5 to 150 Inclusive Maximum Gear Pitch Dia. of.(18.00in )
Typical 30 Deg. Spiral Ang. 14.00in 
Gear Using 12in Dia. Cutter.14.00in (16.00in ) At The Following Ratios.10.50in (12.75in ) Diametral Pitch (Coarsest 2.00in 
MACHINE SPECIFICATIONS:
Machine Center to Nose Of Spindle2.50in to 13.50in 
Root Angle.-12 Deg.to 66 Deg. 
(-12 Deg.to 90 Deg.) Sliding Base Withdraw 2in ,Advance 3in 
Vertical Offset4.50in Up and Down Cutter Spindle Rotation Angle (Tilt)0 Deg. to 180 Deg.
Swivel Angle0 Deg. to 355 Deg.
Eccentric Angle0 Deg. to 160 Deg.
Cradle Angle0 Deg. to 180 Deg.
AXIS SPEEDS - MAXIMUM:
Y Cutter Spindle 115 RPM WORKSPINDLE DIMENSIONS:
Diameter of Tapered Hole at Large End 3 29/32in 
Taper Per Foot.39/64in 
Depth of Taper.6in 
Diameter of Hole Through Spindle.3 1/16in 
Diameter of Spindle Nose5 1/2in 
Diameter of Spindle Nose5 1/2in 
Length x Width x Height.126in x102in x 84in 
(Width can be adjusted to 90in ) Weight24,000 lbs.