Mazak FF660 Spares or Repair (Machine powers on with no alarms but cannot operate in manual or program mode) Best offers invited
Price
Offers
Mazak FF660 complete with 24 tool ATC and pallet changer and all manuals.
Additional Technical Information:
- Pallet Size: 500 mm x 500 mm
- Pallet load: 350 Kg
- Hole diameter: M16 x P2
- Pitch: 200 mm
- No. of holes: 9
- 4 positions or 90 degree non-stop
- Table indexing time: 2.6 sec / 90 degree
- Height from machine bottom or base bottom face to pallet top surface: 975 mm
- Maximum workpeice height: 780 mm
- Distance between spindle nose and pallet centre: Minimum 150 mm / Maximum 760 mm
- Distance between spindle centre and pallet top surface: Minimum 100 mm / Maximum 760 mm
- Maximum drilling capacity (Twist drill / material: A5052): 25 mm
- Maximum tapping capacity (material: A5052): M24 x P3.0
- Maximum milling capacity (material: A5052): 1526 cm3/min
- Maximum end-milling capacity (material: A5052): 1500 cm3/min
- Maximum rapid traverse rate: 90000 mm/min
- Maximum cutting feed-rate: 1 to 40000 mm/min
- Pull stud type: ANSI
- Maximum diameter of tool stored: 115 mm
- Without adjacent tools: 122 mm
- Maximum tool weight including tool holder and pull stud: 7Kg
- Maximum tool length from taper reference plane: 400 mm
- Chip-to-chip time: 2.8 secÂ
Further Information
Year of Manufacture
1999
Width
2.00
Height
3.00
Weight
9250.00
Accessories Included
Yes
Documentation Included
No
Viewable Under Power
Yes
Collect-Deliver-Install
Remove the stress & worry of collecting, installing and maintaining your machine.